3) I kept my PC's addressing the same, but changed its gateway to VLAN1 as 192.168.1.7 (previously it was our router 192.168.1.15), and the PC can now ping the Laptop and the Laptop can ping the PC.
Kentrox Router = 192.168.1.15 Here is my configuration thus far: version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption! hostname ...
192.168.1.15 The 3560 is 192.168.1.7 Hmm....so I need to use 802.1Q trunking on a Routed Port on the 3560, right? And then I need to divide the "Routed Port" into multiple subinterfaces, right?
3) I kept my PC's addressing the same, but changed its gateway to VLAN1 as 192.168.1.7 (previously it was our router 192.168.1.15), and the PC can now ping the Laptop and the Laptop can ping the PC.
ip address 192.168.10.1 255.255.254.0 ip helper-address 192.168.1.1 There is only 1 port (#22) in VLAN10 so far. I put the access line on the port (22) and I put the ip helper-address on VLAN10 as ...
Ok I have two vlans - Vlan 1 default and Vlan 5 Service. I know that on my switches I need to add a IP address helper of the DHCP so the systems can get to DHCP.
ip routing ip udp-bcast-forward timesync sntp sntp unicast snmp-server community "public" Unrestricted vlan 1 name "Default PC 0" untagged 1-12,14-26 ip address 192.168.0.8 255.255.255.0 tagged 13 ...
DHCP / Local DNS Issue. ... However, I have to release their IP address and renew it to fix the problem. ... If their station were to somehow lose their registration within the Wins, could this be ...
C 192.168.225.0/24 is directly connected, FastEthernet0/0.225 ... by mcooper · 9 years ago In reply to VLANs and routing trouble. Thanks to everyone for replying to my problem so quickly! ...
Single Win2003 DHCP server addressing to several Vlans. ... 1004 fdnet 101004 1500 - - - ieee - 0 0 ... please read our TechRepublic Forums FAQ.
1.No need to install any other devise, just configure 2 vlans in the switch-Vlan2 & Vlan 3. 2.Create two dhcp pools in the cisco switch with 2 different subnets as per your requirement.
in our college we having the dhcp&dns in a single server, and also for internet connection we are using BSNL broadBand line it was pl...
You can put users who are "bandwidth hogs" (that is, their jobs require constant use of the network to interact with a particular server) on the same VLAN segment with the servers to which they ...
HSRP stands for Hot Standby Router Protocol, and what it does is create a virtual IP address (which hosts will use as the gateway address). This virtual address is free to move between configured ...
by TobiF · 9 years ago In reply to VLANs and routing trouble. The subnet mask tells each host (computer) on an IP network, what addresses should be directly available. ... 192.168.225.X 255.255 ...
Here is the issue...We have a network with 5 vlans , and 15 endpoint switches (2950s). In two areas of the network, a port has been desig...
You would need to configure the physical cable on the physical switch as a VLAN Trunk Protocol (VTP) port; this is the opposite of the standard cabling that may usually go with a server to the ...
Well, The points keep going up so I am bound to get the right answer soon. this is the problemAfter having to sort out the ealier prob...
After having to sort out the ealier problems with DHCp, its now working, except for the allocation of the default gateway. There is n...
I am working at a branch office and have been tasked with changing out the DHCP scope to match the overall corporate IP address scheme. The main office assigned me an IP address range of 192.168.0 ...
hi can you guide me now to do in revised setup In-short Issue of 192.168.100.1 to 192.168.100.254 Scope Range it's Assigned to pc + servers & some of static device.