HSRP stands for Hot Standby Router Protocol, and what it does is create a virtual IP address (which hosts will use as the gateway address). This virtual address is free to move between configured ...
HSRP stands for Hot Standby Router Protocol, and what it does is create a virtual IP address (which hosts will use as the gateway address). This virtual address is free to move between configured ...
Hi, thanks for your reply, actually I found that after configuring the HSRP; voice calls from the IP phones from one of the VLANs are going one way. i.e. we can hear the remote user but he can't ...
Ok I have two vlans - Vlan 1 default and Vlan 5 Service. I know that on my switches I need to add a IP address helper of the DHCP so the systems can get to DHCP.
ip routing ip udp-bcast-forward timesync sntp sntp unicast snmp-server community "public" Unrestricted vlan 1 name "Default PC 0" untagged 1-12,14-26 ip address 192.168.0.8 255.255.255.0 tagged 13 ...
by TobiF · 9 years ago In reply to VLANs and routing trouble. The subnet mask tells each host (computer) on an IP network, what addresses should be directly available. ... 192.168.225.X 255.255 ...
Here is the issue...We have a network with 5 vlans , and 15 endpoint switches (2950s). In two areas of the network, a port has been desig...
You can put users who are "bandwidth hogs" (that is, their jobs require constant use of the network to interact with a particular server) on the same VLAN segment with the servers to which they ...
ip address 192.168.10.1 255.255.254.0 ip helper-address 192.168.1.1 There is only 1 port (#22) in VLAN10 so far. I put the access line on the port (22) and I put the ip helper-address on VLAN10 as ...
You would need to configure the physical cable on the physical switch as a VLAN Trunk Protocol (VTP) port; this is the opposite of the standard cabling that may usually go with a server to the ...
C 192.168.225.0/24 is directly connected, FastEthernet0/0.225 ... by mcooper · 9 years ago In reply to VLANs and routing trouble. Thanks to everyone for replying to my problem so quickly! ...
3) I kept my PC's addressing the same, but changed its gateway to VLAN1 as 192.168.1.7 (previously it was our router 192.168.1.15), and the PC can now ping the Laptop and the Laptop can ping the PC.
Kentrox Router = 192.168.1.15 Here is my configuration thus far: version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption! hostname ...
192.168.1.15 The 3560 is 192.168.1.7 Hmm....so I need to use 802.1Q trunking on a Routed Port on the 3560, right? And then I need to divide the "Routed Port" into multiple subinterfaces, right?
About HSRPTrack HSRP Status. Guidelines : The status of your HSRP ...
Add network redundancy with Cisco HSRP. ... To do this, I’m going to enlist the help of Cisco’s Hot Standby Routing Protocol (HSRP), which virtualizes the router address.
HSRP Virual MAC security port violation. By mah_alh14 · 11 years ago. Hello, I used Cisco Switches 2960 and 3560 as access switches, port security enabled, HSRP configure in Core Switches ...
HSRP is a Cisco proprietary protocol for redundancy. It provides nearly 100 percent router availability and redundancy. So, if one router goes down, a backup router takes over the routing ...
I guess you are looking for the command? Example for changing your DHCP POOL dhcpd address 192.168.16.1-192.168.16.11 Keep in mind depending on the version of the IOS you are limited in the number ...
I am setting up a new ASA 5505 for static ip. I am trying to setup RDP to specific internal IP addresses runing NAT. I have tried 2 different configurations and I still cannot RDP into 192.168.0.18.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.