I am working at a branch office and have been tasked with changing out the DHCP scope to match the overall corporate IP address scheme. The main office assigned me an IP address range of 192.168.0 ...
in our college we having the dhcp&dns in a single server, and also for internet connection we are using BSNL broadBand line it was pl...
I am working at a branch office and have been tasked with changing out the DHCP scope to match the overall corporate IP address scheme. The main office assigned me an IP address range of 192.168.0 ...
After having to sort out the ealier problems with DHCp, its now working, except for the allocation of the default gateway. There is n...
Well, The points keep going up so I am bound to get the right answer soon. this is the problemAfter having to sort out the ealier prob...
hi can you guide me now to do in revised setup In-short Issue of 192.168.100.1 to 192.168.100.254 Scope Range it's Assigned to pc + servers & some of static device.
Problem: my win2000 box comes up on the wireless network. It shows up in the DHCP list as having two mac addresses and three (internal) IP addresses.
Hello, I need to have 1 DHCP server dole out 3 different Ip address subnets. Say 192.168.100.x 192.168.101.x 192.168.1...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Hi gechurch, Thank you for your reply. The modem will be the interface between the server and the Internet. When I set the modem into modem only mode it gets an IP of 192.168.100.1
DHCP / Local DNS Issue. ... However, I have to release their IP address and renew it to fix the problem. ... If their station were to somehow lose their registration within the Wins, could this be ...
Ok I have two vlans - Vlan 1 default and Vlan 5 Service. I know that on my switches I need to add a IP address helper of the DHCP so the systems can get to DHCP.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
ip routing ip udp-bcast-forward timesync sntp sntp unicast snmp-server community "public" Unrestricted vlan 1 name "Default PC 0" untagged 1-12,14-26 ip address 192.168.0.8 255.255.255.0 tagged 13 ...
Scope 2 IP range is 192.168.1.100 to 192.168.1.150 In reseravtion i have given my device B mac addres and Static ip as 192.168.1.108. From my device i try to get the IP address. results are as follows
thanx for answer but now i just want to know if it is possible to configure dhcp cisco router to give a pool of address at a sub network which will be the VLAN subnet.
The problem: We are running out of IP addresses rapidly. ... Splitting up DHCP by Device Type. ... Servers and Core Devices will go in the range 172.16.0.1 - 254 Printers will go in the range 172 ...
ip address 192.168.10.1 255.255.254.0 ip helper-address 192.168.1.1 There is only 1 port (#22) in VLAN10 so far. I put the access line on the port (22) and I put the ip helper-address on VLAN10 as ...
can someone tell me how can i enabme dhcp on router so that all my network devices can get ip addresses from router
Analyze DHCP configuration options. ... changing out the DHCP scope to match the overall corporate IP address scheme. The main office assigned me an IP address range of 192.168.0.200 through 192 ...