Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
I am trying to set up a lab environment using a Cisco Router. It could be any of the following, 1720, 1721 or 2621. I have run into the ...
ip address 192.168.0.200 255.255.255.0! interface Vlan10 no ip address! router rip version 2 ... If you're new to the TechRepublic Forums, please read our TechRepublic Forums FAQ.
configuration of cisco 2800 series router. ... A <config-if> ip add 192.168.1.150 NM ... best judgment when posting in the forums--revealing personal information such as your e-mail address ...
authentication open mac-address mac_methods ! no ip source-route ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.0.1 192.168.0.9 ip dhcp excluded-address 192.168.0.61 192.168 ...
Log Out. Make configuration a snap with the Cisco Network Assistant. ... ConfigMaker still works great for configuring the basic features on the most common Cisco routers out there, typically the ...
I've also seen some sample labs and an entire CCIE commercial lab workbook, all based on using Dynamips, on the Internetwork Expert Web site. Conclusion.
(1) Which of the defined usernames are you connecting with (2) Is the dns-server 192.168.2.4 able to resolve non-local names
I guess you are looking for the command? Example for changing your DHCP POOL dhcpd address 192.168.16.1-192.168.16.11 Keep in mind depending on the version of the IOS you are limited in the number ...
VNC Configuration on Solaris 10. ... To create VNC login password, just execute vncpasswd command and enter a valid password twice as usual. 7. To start an instance of VNC server, just execute ...
I am setting up a new ASA 5505 for static ip. I am trying to setup RDP to specific internal IP addresses runing NAT. I have tried 2 different configurations and I still cannot RDP into 192.168.0.18.
Public IP (Static)? Private IP 172.16.0.1 / SN 255.255.255.128 ... Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address ...
ASA 5505 configuration SOS!!!! ... It turned out that Netgear can pass external IP address directly and browse internet, no problem at all. ... dhcpd address 192.168.1.2-192.168.1.33 inside
NIS configuration not working on Linux. ... FEDORA.MINDTREE.COM next host to add: ... It gives a 'Permission denied' message and does not login via ssh.
HSRP stands for Hot Standby Router Protocol, and what it does is create a virtual IP address (which hosts will use as the gateway address). This virtual address is free to move between configured ...
configuration for a client wireless AP. ... I want the PS2 to have the IP 192.168.2.6 (which is currently unassigned). ... No device can share the same IP address on the same network. Whichever ...
Hi, thanks for your reply, actually I found that after configuring the HSRP; voice calls from the IP phones from one of the VLANs are going one way. i.e. we can hear the remote user but he can't ...
Analyze DHCP configuration options. ... changing out the DHCP scope to match the overall corporate IP address scheme. The main office assigned me an IP address range of 192.168.0.200 through 192 ...
Just now i've installed exchange server5.5. Created users and tried to connect it thru Outlook express But unble to send mail to other u...
Sonicwall Configuration page empty. ... and in the main window it displays a message "Sonicwall has granted you access" . ... i have tried my usr/password and the default usr/password and i am ...