Hi, everybody today i have a problem with my network to authenticate, user connected on A vlan and using PPPOE access. The configuration PPPOE is on cisco router, and users list with their ip ...
Hi, everybody today i have a problem with my network to authenticate, user connected on A vlan and using PPPOE access. The configuration PPPOE is on cisco router, and users list with their ip ...
Hi all. I have a DSL router configured as a layer 2 bridge and directly connected to it is a Cisco 831. I would like to have the Cisco 831 running as a PPPoE client for the DSL connection and NAT ...
RADIUS authentication and VPN. ... hit the ok button and stick with this one 192.168.16.1-254 subnet mask 255.255.255.0. ... in it to run right AND that you need to remove ip address ranges you ...
(1) Which of the defined usernames are you connecting with (2) Is the dns-server 192.168.2.4 able to resolve non-local names
Hello, I have a cellular modem, Airlink Raven X, connected to WAN port of Cisco router 871. Neither site to site VPN nor EZVPN do come up. The debug crypto isakmp gives me the following result:
Cisco's Unified Computing System (UCS) emulator allows people who don't have UCS to play with it. Here's what you need to know about this handy tool.
If you have been an admin for a while, you probably know to basics on networking concepts. If you want to start your Cisco track, then it would be helpful to have some background on the basics of ...
Hello, I live in the UK and last year graduated with a degree in computer science. I have found that my degree has meant little in the re...
PPTP VPN through a Cisco PIX By jdaly · 12 years ago Ok, here is my dilemma, I've been trying to setup a simple PPTP VPN at our office so a few employees can VPN to our server once they move.
Yes I am trying to access a LAN device using a the WAN ip address. This worked fine when we used the Linksys router. I don't have a problem with using the LAN addresses but we have a handful of ...
aaa authentication telnet login tacacs local ... by CG IT · 13 years ago In reply to Cisco-to-HP VTP setup. Cisco Switch VTP mode server with other switches as VTP clients in same VTP domain. ...
You have a good configuration down so far, but you are missing a few things. 1) The default gateways on your DHCP scope should be the IP Addresses of the VLAN they belong to, so below is how it ...
what is the best way to study for the Cisco exams. I have studied for the exams and was only able to make 776 the cut off mark is 822 and...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Got my A+ 6 years ago and have been a Lan/pc guy with plenty of daily experience ever since. What recommendations are there for Cisco cert track if I want to do self study, as in home lab and/or a ...
David Davis shows you how to view ACL statistics and, with the help of a new feature in the Cisco IOS, how you can view these usage statistics per interface and per direction.
access-list 1 permit 192.168.105.0 0.0.0.255 ... by ipcbcory · 10 years ago In reply to help on Cisco 2800 router. Thanks for the configuration example, it's helpful. ...
I am trying to set up a lab environment using a Cisco Router. It could be any of the following, 1720, 1721 or 2621. I have run into the ...
by David Davis CCIE in Networking on September 22, 2005, 12:00 AM PST Most IT pros know that using Telnet to manage routers, switches, and firewalls is not exactly a security best practice. ...
The easiest way to prevent spoofing is using an ingress filter on all Internet traffic. The filter drops any traffic with a source falling into the range of one of the IP networks listed above.