You have a good configuration down so far, but you are missing a few things. 1) The default gateways on your DHCP scope should be the IP Addresses of the VLAN they belong to, so below is how it ...
You have a good configuration down so far, but you are missing a few things. 1) The default gateways on your DHCP scope should be the IP Addresses of the VLAN they belong to, so below is how it ...
ip nat inside source static udp 192.168.0.200 3389 interface ... do you need an Ip address on the VLAN interface? ... please read our TechRepublic Forums FAQ.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Following is the config for my router connecting to the Internet. But I am unable to connect to either the dns or the Internet. Kindl...
What are you looking for? GO. IT Policy Downloads 5G Developer
Hello All I have been testing this for a while, I have a few questions. I have a hp Switch 2**0 I have split this up into 4 Vlans. I ...
(1) Which of the defined usernames are you connecting with (2) Is the dns-server 192.168.2.4 able to resolve non-local names
Hello, I have a cellular modem, Airlink Raven X, connected to WAN port of Cisco router 871. Neither site to site VPN nor EZVPN do come up. The debug crypto isakmp gives me the following result:
aaa authentication telnet login tacacs local ... by CG IT · 13 years ago In reply to Cisco-to-HP VTP setup. Cisco Switch VTP mode server with other switches as VTP clients in same VTP domain. ...
Cisco's Unified Computing System (UCS) emulator allows people who don't have UCS to play with it. Here's what you need to know about this handy tool.
PPTP VPN through a Cisco PIX By jdaly · 12 years ago Ok, here is my dilemma, I've been trying to setup a simple PPTP VPN at our office so a few employees can VPN to our server once they move.
Hello, I live in the UK and last year graduated with a degree in computer science. I have found that my degree has meant little in the re...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Yes I am trying to access a LAN device using a the WAN ip address. This worked fine when we used the Linksys router. I don't have a problem with using the LAN addresses but we have a handful of ...
If you have been an admin for a while, you probably know to basics on networking concepts. If you want to start your Cisco track, then it would be helpful to have some background on the basics of ...
what is the best way to study for the Cisco exams. I have studied for the exams and was only able to make 776 the cut off mark is 822 and...
by David Davis CCIE in Networking on September 22, 2005, 12:00 AM PST Most IT pros know that using Telnet to manage routers, switches, and firewalls is not exactly a security best practice. ...
I have a need to take dataone connectivity through CISCo router.I have got a static IP assigned by service provider. I am able to access ...
Got my A+ 6 years ago and have been a Lan/pc guy with plenty of daily experience ever since. What recommendations are there for Cisco cert track if I want to do self study, as in home lab and/or a ...
I am having a dataone connectivity with static IP. I need to connect this to my server throgh CISCO router. I am able to configure in for...