I'm having problems getting this ASA 5505 device to actually reset to factory defaults. I did the: devicename>en devicename#conf t d...
I'm having problems getting this ASA 5505 device to actually reset to factory defaults. I did the: devicename>en devicename#conf t d...
(1) Which of the defined usernames are you connecting with (2) Is the dns-server 192.168.2.4 able to resolve non-local names
access-list outside_1_cryptomap extended permit ip 10.60.114.0 255.255.255.0 host 192.168.108.122 ... If you're new to the TechRepublic Forums, please read our TechRepublic Forums FAQ.
Cisco ASA 5505 remote vpn problem. ... ip address pppoe setroute! interface Ethernet0/0 switchport access vlan 2! ... dhcpd address 192.168.1.2-192.168.1.33 inside
Virus stops me from factory resetting by Gdude11 Nov 11, 2016 9:10PM PST I downloaded a nasty virus but every time I try to perform a hard reset it automatically cancels it.
If you only want 20 IPs in the pool your starting address could be 192.168.104.20 and your ending IP address would be 192.168.104.40. Now choose that pool from your pull-down menu. You don't ...
I am setting up a new ASA 5505 for static ip. I am trying to setup RDP to specific internal IP addresses runing NAT. I have tried 2 different configurations and I still cannot RDP into 192.168.0.18.
ASA 5505 configuration SOS!!!! ... It turned out that Netgear can pass external IP address directly and browse internet, no problem at all. ... dhcpd address 192.168.1.2-192.168.1.33 inside
Resetting vpxuser credentials for an ESXi host. ... and then we will turn around and actively try to reconnect to it. To reset the vpxuser account, simply disconnect the host from the vCenter ...
Yep, have tried every combination of admin, Admin, administrator, along with null user and PW. And every factory PW I've read about. I'm thinking I may have to cold reset these bad boys.
Cant access router after factory reset. ... But I cant access the internet, and I cant access the router page. I've tried ipconfig with no luck. I can't even ping the damn thing!
Hello, I have a cellular modem, Airlink Raven X, connected to WAN port of Cisco router 871. Neither site to site VPN nor EZVPN do come up. The debug crypto isakmp gives me the following result:
Cisco's Unified Computing System (UCS) emulator allows people who don't have UCS to play with it. Here's what you need to know about this handy tool.
PPTP VPN through a Cisco PIX By jdaly · 12 years ago Ok, here is my dilemma, I've been trying to setup a simple PPTP VPN at our office so a few employees can VPN to our server once they move.
Yes I am trying to access a LAN device using a the WAN ip address. This worked fine when we used the Linksys router. I don't have a problem with using the LAN addresses but we have a handful of ...
You have a good configuration down so far, but you are missing a few things. 1) The default gateways on your DHCP scope should be the IP Addresses of the VLAN they belong to, so below is how it ...
If you have been an admin for a while, you probably know to basics on networking concepts. If you want to start your Cisco track, then it would be helpful to have some background on the basics of ...
Hello, I live in the UK and last year graduated with a degree in computer science. I have found that my degree has meant little in the re...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
what is the best way to study for the Cisco exams. I have studied for the exams and was only able to make 776 the cut off mark is 822 and...