ip address 192.168.0.200 255.255.255.0! interface Vlan10 no ip address! router rip version 2 ... If you're new to the TechRepublic Forums, please read our TechRepublic Forums FAQ.
ip address 192.168.0.200 255.255.255.0! interface Vlan10 no ip address! router rip version 2 ... If you're new to the TechRepublic Forums, please read our TechRepublic Forums FAQ.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
I am trying to set up a lab environment using a Cisco Router. It could be any of the following, 1720, 1721 or 2621. I have run into the ...
Just now i've installed exchange server5.5. Created users and tried to connect it thru Outlook express But unble to send mail to other u...
configuration of cisco 2800 series router. ... A <config-if> ip add 192.168.1.150 NM ... best judgment when posting in the forums--revealing personal information such as your e-mail address ...
I'm going to skip the login procedure; I’ll assume you’re familiar with it. The only thing I'd like to point out is that Cisco has two basic means of logging in: password-based and username-based.
I am having a problem setting up a Cisco 871W Router. I cannot get connected to the internet. I warn you that I am somewhat of a newbie at this so I apologize if I say or have done or will do ...
Cisco ASA 5505 remote vpn problem. ... ip address pppoe setroute! interface Ethernet0/0 switchport access vlan 2! ... dhcpd address 192.168.1.2-192.168.1.33 inside
firstly Thanks for your whole reseach ya nepal is worst in govt service. (nepal telecom is partially govt owned) we have here Nepal Telecom is the IPS itself too.
authentication open mac-address mac_methods ! no ip source-route ip cef no ip dhcp use vrf connected ip dhcp excluded-address 192.168.0.1 192.168.0.9 ip dhcp excluded-address 192.168.0.61 192.168 ...
I've also seen some sample labs and an entire CCIE commercial lab workbook, all based on using Dynamips, on the Internetwork Expert Web site. Conclusion.
Log Out. Make configuration a snap with the Cisco Network Assistant. ... ConfigMaker still works great for configuring the basic features on the most common Cisco routers out there, typically the ...
Cell phone to land line problem by Becky M Jul 2, 2010 10:21AM PDT Starting the end of December, I started having problems calling land lines from my cell phone only at my home.
(1) Which of the defined usernames are you connecting with (2) Is the dns-server 192.168.2.4 able to resolve non-local names
I guess you are looking for the command? Example for changing your DHCP POOL dhcpd address 192.168.16.1-192.168.16.11 Keep in mind depending on the version of the IOS you are limited in the number ...
Public IP (Static)? Private IP 172.16.0.1 / SN 255.255.255.128 ... Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address ...
I am setting up a new ASA 5505 for static ip. I am trying to setup RDP to specific internal IP addresses runing NAT. I have tried 2 different configurations and I still cannot RDP into 192.168.0.18.
ASA 5505 configuration SOS!!!! ... It turned out that Netgear can pass external IP address directly and browse internet, no problem at all. ... dhcpd address 192.168.1.2-192.168.1.33 inside
VNC Configuration on Solaris 10. ... To create VNC login password, just execute vncpasswd command and enter a valid password twice as usual. 7. To start an instance of VNC server, just execute ...
HSRP stands for Hot Standby Router Protocol, and what it does is create a virtual IP address (which hosts will use as the gateway address). This virtual address is free to move between configured ...