I have several SOHO routers on my network. (Linksys and D-Link). I get five static WAN IPs from my DSL provider and I have segregated m...
I have several SOHO routers on my network. (Linksys and D-Link). I get five static WAN IPs from my DSL provider and I have segregated m...
Configure IT Quick: Static routing with Cisco routers. ... the packets to router B's serial 0 interface with the address of 192.168.2.2. Router B will see that they are destined for a local ...
· 192.168.10.65: The next hop router used to get to subnet 32; The routing table for the 2500B router now knows how to get to subnet 32 and packets can be sent from HostA to HostB and back again. ...
Gents, Im trying to figure out how to setup static routes between routers for traffic. Here is my setup: - 1 main router 192.168.2.20 ...
Static Routes Between Two Routers. ... 192.168.5.12 192.168.x.12 192.168.5.1 The exact set out will vary from router model to router model, many will require a specific return entry for each ...
Static Routes Between Two Routers. ... Router 5 = IP address 192.168.5.1 All on subnet mask 255.255.255.0. Everything on my network is static IPs, no DHCP. What I want to do is be able to link ...
Please forgive me if this question has been answered. I could not find an answer. I have 3 routers that serve my home system. Router-1 is connected to th...
by TobiF · 9 years ago In reply to VLANs and routing trouble. The subnet mask tells each host (computer) on an IP network, what addresses should be directly available. ... 192.168.225.X 255.255 ...
To thoroughly understand routing, you need to understand routing tables. In this Daily Feature, Deb Shinder explains how routing tables are used, the information they contain, and how to view and ...
The users are not part of any local network that the exchange servers are on. Email comes into my mail server to their mailbox with an address of [email protected] and is forwarded to a custom ...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
However, in this case, 192.168.10.1 knows nothing about the 10.0.0.0 network, so your packets would get lost because 192.168.10.1 has no idea where to send the packets and will attempt to send ...
C 192.168.225.0/24 is directly connected, FastEthernet0/0.225 ... by mcooper · 9 years ago In reply to VLANs and routing trouble. Thanks to everyone for replying to my problem so quickly! ...
hello, 1 - could y tell me how i create routing between 4 VLAN on HP Procurve 3500yl : VLAN ID 100 - VoIP: 192.168.101.0/24 VLAN ID 10...
Can anyone help me remove the following static route from my cisco 2500 (yeah I know its old) D EX 65.199.44.0 [170/2195456] via 10...
by clicking in the top left corner of the spreadsheet. Once all cells are highlighted, on the menu bar click format - row - height and set the row height to whatever you want it to be.
I set static ip of 192.168.1.64 with subnet 255.255.255.0 and port to 1024. I note the internet address by logmein on the router. I go to my browser and type in the external internet ip and port ...
i have seen a similar question on here, however have not been able to get mine up and running. i am trying to cascade 2 routers as we are students and have them available (rather than having to ...
Modem has 192.168 address, Router1 is 172.16.0.1 , Router2 is 172.16.1.1 . All PC's are on the same Workgroup, 3 have WinXP pro, 1 is WinXP home and 1 pc is Win98 SE.
I saw a video on Linksys.com that when connecting two routers Lan to Lan, the 1st router (with DHCP enabled) has IP address 192.168.1.1, ...