On my LAN my systems runs on Win 98 i have given IP address 192.168.1.12 , Gateway as 192.168.1.2 ( Which is a gateway server) & i have ...
On my LAN my systems runs on Win 98 i have given IP address 192.168.1.12 , Gateway as 192.168.1.2 ( Which is a gateway server) & i have ...
Server IP is 192.168.0.1 Client IP is 192.168.0.8 ... IP Address - Obtain an IP Address automatically. 3. NIC Card should be bound to the correct TCP/IP Protocol ... Server is not visible in Win98 ...
Now, the problem is that the Dlink is not a modem so I need to connect the Dlink to my SMC and then proceed. ... Connect the wireless router WAN port to any computer and go to the login page thing.
Dlink router to router for internet connection. ... you assign the WAN port with an address on the router B network. such as 192.168.1.2 255.255.255.0 subnet mask. the default gateway is router B ...
Ok here goes.... I have a router1 in my adjacent building that connects to the internet(via uplink) from a particular service provider....
I have BT Voyager 190 modem router that I would like to connect to another wireless router (TPLINK 641G). I'll call BT Voyager as router ...
I had tried to change the LAN IP to 192.168.200.1 in SPA2102, so it is not the same with my di524. and also change the spa2102 in bridge mode. i had tried most setting still no luck to get the ...
Router Configuration 101: Setting up the router. by Christopher Albrecht in Networking on March 3, 2005, 12:00 AM PST Whether it's been years since you've worked with routers or you're just ...
I have a DLink dsl - 504 router with built in ADSL modem and I now have a DLink-DIR-655 wireless router. I need to plug the DIR - 655 ...
IBM ThinkPad A21m 2628 - 12.1" - PIII - 64 MB RAM - 10 GB HDD overview and full product specs on CNET.
Hey everyone, I've recently been connected to ADSL2+. I received a modem (Netgear ADSL2+ Modem DM111P) from my ISP Netspace. I then purch...
Have a wireless IP Wireless Camera (EasyN FS-613B). Trying to access it through a DLink DIR-615 router. Used the included setup software to identify the cam after following the setup procedure by ...
VTP mesages through a router. ... I have 2 switches seperated by a router. I have switch A set VTP server and swicth B set as VTP client but cannot get VLANs to update to switch B.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Following is the config for my router connecting to the Internet. But I am unable to connect to either the dns or the Internet. Kindl...
Dear all, I have a cisco 2511 router with 2 serial and 1 ethernet interface.we are planning to implement two isps on the same router. Can you tell me how i can do this ,is it possible in this Router.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
if you have not already done so! you can enter the configuration of netgear router, by typing http:192.168.0.1 in your web browser ( some times 192.168.02 check doc's) you'll have to log in there ...
Hi there! I'm pretty tired and falling asleep for the night but I noticed your question and I worked on your exact model router for a client just a few hours ago so I'll see what I can do for you.
hi, ii bought a d link dir 300 wireless router in a bid to create wifi environment at home. the problem is i can connect internet n my wifi enabled laptop, after i configure the isp provided ip ...