Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Scope 2 IP range is 192.168.1.100 to 192.168.1.150 In reseravtion i have given my device B mac addres and Static ip as 192.168.1.108. From my device i try to get the IP address. results are as follows
Server 2003 DHCP within a router. ... The router uses addresses between 192.168.1.64-254. That leaves 192.168.1.2-60 for me to mess with. ... or do you simply want machines that get an IP address ...
I usually use something in 192.168.240.x to 192.168.249.0 for the local segement Planning to change at some point (just not ready for the pain that I had with another client and hard coded IP's ...
Hi.. My name is Paresh from Baroda, India, I Want Create & Configure FTP Server. which is operate thou Internet, i m upload & download...
I have a windows server 2003 with Double NIC and the server is DHCP for An Application server connected with clients. and the 3 com Rout...
in our college we having the dhcp&dns in a single server, and also for internet connection we are using BSNL broadBand line it was pl...
Is it possible to disable the screensaver in a windows server 2003? Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including ...
You can create a dyndns account add the address into your router and then setup port forwarding for each service you wish to use. You will then reference the VPN to a hostname rather than an IP ...
I followed exactly what you recommended, I have setup External NIC with IP assigned by the router 192.168.1.5 and Used Router IP as a GW, then I setup the LAN NIC with IP Address 192.168.2.11 and ...
(The specified domain either does not exist or could not be contacted. Group Policy processing aborted." The computers concerned are running Windows Server 2003 R2 and Windows XP SP2.
Windows Server 2003 R2 Terminal Services CAL. ... But Microsoft eOpen shows the order as Windows Server 2008 User TS CAL. I was told by the software vendor that i can "downgrade" automatically ...
Arch.Company currently trying to decide between Windows 2000 Server & 2003 which one to use on a new server. One vendor* says 2000 becau...
Hello, I need to have 1 DHCP server dole out 3 different Ip address subnets. Say 192.168.100.x 192.168.101.x 192.168.1...
Create a new discussion. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.
Hi gechurch, Thank you for your reply. The modem will be the interface between the server and the Internet. When I set the modem into modem only mode it gets an IP of 192.168.100.1
dunno if you're still having this issue, but here's my $.02. your gateway address (the router's IP) is on one subnet (10.10.0.5) and the dhcp server is granting IP address leases on a 10.10.100.0 ...
Hi Guys, i will briefly explain my set up in my home. I have 2003 Server(SYSA) & i have a Main Domain innovation.com with an ip addres...
Friends, I am new to Windows server 2003 os. I have smale network and There are 4 clients. for long time, The IP address has been iss...
I have Windows Server 2003 Standard R2. I ordered 50 Open Licensing Windows Server 2003 per device CALs. I activated them on the eOpen Mi...