TCP/IP is configured to obtain an address automatically in the range of 196.168.0.x with a subnet of 255.255.255.0. Under the Advanced settings on the WINS tab "Enable Netbios over TCP/IP" is enabled.
TCP/IP is configured to obtain an address automatically in the range of 196.168.0.x with a subnet of 255.255.255.0. Under the Advanced settings on the WINS tab "Enable Netbios over TCP/IP" is enabled.
whats the network address range? if the network printer is 10.1.2.201 with a subnet mask 255.255.255.0 that means the the last octet is the host portion and the first 3 octets are the network portion.
Hi. I'm a sort of a newbie in a new job, and I've got a little problem. We have a small office network with three machines. Two are ru...
In a network of around 500 PC's runing NT4 (sp5) and with NTSE installed, some workstations (around 5 and growing) are starting to have p... - Page 2. Search. ... NT4 Login Problem.
Use SuperScan the other day on my home network just to check things out. I extented the IP range (that is to say my DHCP provides 192.16...
First, I am assuming that the address 1**.168.1.64 should be 192.168.1.64 for the first network card. Now, if you want 16 users/workstations per subnet, a subnet mask of 255.255.255.240 will not ...
Hello all, I'm having some home network problems and could use some advice (and a stiff drink). Here's what's going on: My home net... - Page 2
Hello all, I am a long time reader, first time poster. I am somewhat of a novice network administrator/consultant. I was just assign... - Page 2
File and Printer sharing on my home network. ... I also have a networked printer with an IP address of 192.168.0.15. All PCs use DCHP to get their IP address. ... If you're new to the TechRepublic ...
I failed to mention that, while the home page is in an almost froze state, I can't type an address in the address bar. Reason for that, I believe, is due to the page not being loaded completely.
What was the IP address that it had when you finally got it connected? ... To keep trying to connect both wirelessly, I checked again for ip conflict, one 192.168.2.2 and the other 192.168.2.5 ...
Here is a new solution...log into your router, select your network and hit edit. look for the channel it is broadcasting to.by default it is usually channel six.
Problem with Smart TV network connection after firmware upda ... Smart TV network connection after firmware upda. ... corrected the Facebook login issue. But the Smart Hub has updated twice since ...
So, I assigned static IP's to my 5 computers in my clinic and now my network is running as wonderful as the day it was installed. What a learning experience I would never want to go thru again. It ...
Acquiring network address problem by Boothbay Jan 28, 2007 3:48AM PST I have XP on both computers, router and a wireless adapter on the laptop.
TECHREPUBLIC BLOG ROUNDUP NEWSLETTER for August 31, 2005 WHAT'S YOUR PROBLEM WITH RSS? According to our data for the past month, ...
VNC Problem. By senthilm_india · ... which will be not recognized on internet as the same is a internal IP Address. You will somehow connect using the IP Address alloted to you by Airtel (122.164 ...
Western Digital 250GB SATA Drive ... but in India we put all our wits to solve comp probs... Buying a new proc or hdd esp. during warranty period. Anyway, if you're sure about using the NEW ...
Here is a problem I'm having. I've got a main campus that has 8MB Internet service and everything is up and working. I have a branch c...
Has anyone had a problem with defective RDRAM in Dell computers?